H3C WA6320S-C indoor placement type 802.11ax wireless access device
The H3C WA6320S-C wireless product is a new generation 802.11ax product independently developed by H3C Technology Co., Ltd. It adopts a dual band four stream 802.11ax design and can be widely used in enterprises, schools, medical and other scenarios.
WA6320S-C has a built-in smart antenna that supports dual band access. It has a compact and beautiful appearance, and is flexible in installation. It is suitable for various installation methods such as wall mounted, ceiling mounted, and 86 box.
Product Features
Design of the New Generation 802.11ax Technology
The H3C WA6320S-C product adopts the new generation 802.11ax protocol, dual band 4-channel design, and the maximum access speed of the whole machine can reach 1.775Gbps. All RF frequencies support MU-MIMO. The 5GHz RF adopts a design with 2 spatial streams, with a maximum access rate of 1.2Gbps; The 2.4GHz RF adopts a dual stream design with a maximum access rate of 0.575Gbps, which is very suitable for indoor installation scenarios.
Realize simultaneous communication among multiple terminals and break through the drawbacks of traditional wireless competition
The H3C WA6320S-C AP supports MU-MIMO technology, which is the most important feature of 802.11ax. Through MU-MIMO technology, the AP can send data to multiple terminals at the same time, that is, the WA6320S-C can send data information to multiple terminals simultaneously, depending on the number of terminal streams. The WA6320S-C machine can simultaneously send wireless messages to up to 4 terminals, breaking through the traditional wireless network serial communication mechanism. The utilization rate of wireless spectrum resources is doubled, greatly increasing the number of effective access users, reducing the deployment cost of wireless networks, and improving the user experience in high-density user situations..
Realize intelligent cloud access and high-quality wireless network TCO
The WA6320S-C AP complies with the 802.11ax protocol standard and can provide access to two different frequency bands, achieving wireless transmission rates of 1.2Gbps+0.557Gbps. By using built-in antenna coverage technology, it is possible to effectively provide higher performance mobile cloud access services in terms of coverage range, access density, and stable operation, and assist users in achieving high-quality wireless network TCO (Total Cost of Ownership).
Support OFDMA technology (Orthogonal Frequency Division Multiple Access)
The WA6320S-C wireless access point product supports OFDMA technology, allowing APs to further segment wireless bandwidth and transmit data to multiple terminals using different subcarriers at the same time, reducing the delay caused by multi-user air interface resource conflicts and backoff in traditional protocols, and improving the user experience of low latency applications such as voice and video in multi-user scenarios.
Support spatial reuse technology
The WA6320S-C wireless access point product supports spatial multiplexing technology. By identifying non associated messages and controlling the adjustment of transmission power, the AP can improve the problem of co channel interference during multi-user use and greatly enhance the utilization of spectrum resources.
Support TWT technology (target wake-up time)
The WA6320S-C wireless access point product supports TWT technology, allowing APs to uniformly schedule the wake-up and sleep of terminals. This not only reduces conflicts between terminals, but also reduces unnecessary wake-up times, achieving the goal of energy conservation.
Green and low-carbon design
WA6320S-C adopts a professional green and low-carbon design, supporting dynamic MIMO power-saving mode (DMPS) and enhanced automatic power-saving transmission (E-APSD), intelligently identifying the actual performance requirements of terminals, rationalizing the allocation of terminal sleep queues, and dynamically adjusting MIMO working modes.
WA6320S-C supports Green AP mode, achieving single antenna standby and more precise energy saving.
WA6320S-C uses innovative packet by packet power control (PPC) technology to dynamically adjust the bidirectional power between AP devices and clients while ensuring successful message transmission, in order to reduce device energy consumption and extend mobile terminal standby time.
• Provide local forwarding function
When WA6320S-C (Fit mode) is forwarded through a wide area network, the wireless access device is deployed at the branch office, while the wireless controller is deployed at the headquarters. All user data is sent from the wireless access device to the wireless controller, which then forwards it centrally. WA6320S-C can directly convert data packets into wired format packets on wireless access devices, allowing data packets to be forwarded locally without passing through wireless controllers, greatly saving wired bandwidth.
Supports IPv4/IPv6 dual stack (Native IPv6)
WA6320S-C fully supports IPv6 features, and the device implements a dual protocol stack of IPv4/IPv6. Regardless of whether the original wired network is IPv4 or IPv6, it can automatically register with WX series controllers to provide WLAN services without becoming an information island in the network.
• Provide EAD wireless access
The End User Admission Domination (EAD) solution starts from the perspective of controlling the secure access of user terminals to the network. It integrates network access control and terminal security products, enforces enterprise security policies on user terminals accessing the network, and through linkage with security policy servers, can handle unqualified wireless clients such as virus infections or system vulnerabilities through various methods such as offline, isolation, reminder, or monitoring. Only wireless clients that comply with the corresponding security policies are allowed to access the network normally, thereby improving the overall security of the wireless network.
• Support remote probe analysis
WA6320S-C supports as a sensor device for remote probe analysis. Each RF can listen, capture, and real-time mirror Wi Fi messages within the coverage area to local analysis devices for network administrators to troubleshoot and optimize analysis. The remote probe analysis function can perform non convergence mirroring on the working channel, as well as polling sampling on all channels, flexibly meeting the requirements of wireless network monitoring and operation.
• Built in RF Optimization Engine (ROE)
The WA6320S-C is equipped with an RF Optimization Engine, which effectively enhances application acceleration and quality assurance in scenarios such as high-density access and streaming media transmission in wireless deployment through feature and protocol based RF optimization. This includes multi-user fair scheduling, mixed access fairness, interference filtering, fast speed, spectrum navigation, multicast enhancement (IPv4/IPv6), packet by packet power control, and intelligent bandwidth guarantee.
• Support intelligent load balancing
WA6320S-C supports a complex balancing method based on the number of access users and traffic. When the wireless controller detects that the load on the wireless access device exceeds the set threshold, it will automatically calculate whether there are lighter load wireless access devices available for the user to access. If there are, it will reject the user's association request and the user will switch to other lighter load wireless access devices. However, if the wireless user is not in the overlapping coverage area, traditional load balancing methods often lead to network disconnection and result in false balancing. H3C's innovative support for intelligent load balancing technology ensures that load balancing is only activated for wireless users in overlapping coverage areas, effectively avoiding the occurrence of false balancing and maximizing wireless network capacity.
• Supports Chinese SSIDs
WA6320S-C supports the use of Chinese SSIDs, which can specify SSIDs containing up to 16 Chinese characters or mixed Chinese and English SSIDs, providing greater convenience for domestic users.
• Fully support intelligent wired and wireless integrated management
H3C's entire series of wireless products can achieve WSM based integrated management of wired and wireless through open network management protocols.
WSM is a wireless operation management component developed by H3C based on the next-generation business software platform iMC (Intelligence Management Center). It not only provides flexible component selection for administrators, but also conforms to the mainstream SOA architecture in the industry, has good scalability, and can meet the constantly evolving needs of customer network management. A web-based management system provides a simple and user-friendly management platform for wireless business managers. In conjunction with the iMC intelligent management platform and other components, it can also achieve functions such as panel management, fault management, performance monitoring, software version management, configuration file management, and access user management for wireless devices. It can also unify the management of other devices in the network, truly realizing intelligent wired and wireless integrated management.